WL25

Standard Components

  • Perkins 403 J-11, 18,4 kW / 25 HP, Stage V
  • Hydraulic articulated pendulum steering, pendulum angle ± 12°
  • Steering cylinder: 1
  • 10 - 16.5 EM ET0
  • Hydrostatic all-wheel drive system, travel direction can be chosen via joystick
  • Operating brake: Drum brake (combined with parking brake)
  • Central service and parking brake in the drive train acts on all 4 wheels
  • 3rd Control circuit front DN10 incl. single detent, operation via lever
  • Hydraulic oil cooler
  • Floating position for lift and tipping cylinders
  • Lock for steering valve
  • Operator's canopy with ROPS / FOPS tested restraint system, operator's cab can be tilted to the side
  • Fully suspended comfort seat with safety belt, weight, back and height adjustment, 60 mm spring travel
  • Adjustable steering column
  • Right armrest
  • Work lights, 2 in front and 2 in rear
  • Operating hour meter
  • Fuel display
  • Hydraulic quickhitch system for attachments
  • Lighting equipment according to StVZO (road traffic licensing regulations)
  • Lockable tank cap
  • Cast rear counterweight
  • Bolt self-loading equipment

Options

  • Driver's roll bar foldable EPS (work lights: (1 at the front of the loading station <x id=\</li>
  • 2-door cab, including heating and ventilation
  • Radio preparation DAB (antenna, speakers)
  • Radio DAB (full set)
  • Artificial leather seat; heated seat
  • Artificial leather seat; air cushioned
  • Artificial leather seat; air cushioned; heated seat
  • Fabric seat (standard with cab)
  • Fabric seat; heated seat
  • Fabric seat; air cushioned
  • Fabric seat; air cushioned; heated seat
  • Work lights LED Performance (2000 lm) on the roof, 2 in front, 2 in back
  • Work Light LED Basic (1000 lm) 1 additional unit on the charging station
  • Rotating beacon (orange), National regulations must be observed.
  • Rotating beacon (orange) with magnetic base,3cx id="102" xmlns="urn:oasis:names:tc:xliff:document:1.2" />National regulations must be observed.
  • Individual operating permit < 25 km/h
  • License plate holder
  • Preheating: 230 V: Coolant
  • Axle T94, hydrostatic medium-pressure all-wheel drive, 100% differential lock
  • Speed limiter proportional (slow-speed control)
  • Chassis lift ( 30 mm)
  • 31 x 15.50 - 15 BKT TR 313 ET0, Profile AS, Width 1340 mm
  • 31 x 15.50 - 15 BKT TR 313 ET-37, Profile AS, Width 1410 mm
  • 27 x 10.50 - 15 BKT SkidPower HD ET60, EM tread, width 1080 mm, width when turned 1320 mm
  • 31 x 15.50 - 15 BKT SkidPower HD ET0n Profile EM, width 1340 mm
  • 31 x 15.50 - 15 BKT SkidPower HD ET-37, EM tread, width 1410 mm
  • 31 x 15.50 - 15 BKT TracMaster ET0, Lawn Tire, Width 1340 mm
  • 10 - 16.5 BKT SureTrax HD ET0, Profile SureTrax, Width 1200 mm
  • Turned

Water filling valves without filling (front wheels)

Water filling valves without filling (rear wheels)

Water filling valves without filling (front and rear wheels)

Water filling valves with filling (front wheels)

Water filling valves with filling (rear wheels)

Water filling valves with filling (front and rear wheels)

  • Loading system P-kinematics LS950 (2540 mm)
  • Skid-Steer (mechanical)
  • Skid-Steer (hydraulic)
  • SMS HV (hydraulic)
  • Lowering brake valve (with pipe rupture protection, lifting, and tilting cylinders)
  • Load-dependent damping
  • Bucket position indicator
  • 3. Steering wheel comfort, including single-stage lock on the lever for 3. Control circuit (Operation: About the buttons on the joystick (including tilting in and out)
  • 4. Steering wheel comfort, including single-stage lock on the lever for 3. ControlCircuit (3. The front control circuit cannot be activated at the same time), (Operation: About the buttons on the joystick (including tilting in and out)
  • 4. Control circuit additional via 4-way valve (Operation: (via a separate lever)
  • 3. Control circuit front DN12
  • Pressureless return at the front
  • Hydraulic connection, rear, single-acting (1x SVK, size 3), (loading system or 3.) The steering wheel and front controls cannot be operated at the same time), (Operation: Cüber Hebel for 3. Control circuit)
  • Pressureless return line (1 x SVK Size 3, connector)
  • Shell Panolin S4 HLP Synth46 (biohydraulic oil)
  • Front 3-pin socket for basic functionality, (Operation: Using the switch (0–1) on the steering column, 1. Function lock)
  • Front 3-pin outlet for dual function, (Operation: About the switches (1-0-2) on the steering column, 1. Function latching; 2. Function lock)
  • Front 3-pin outlet for dual function, (Operation: About the 2 buttons on the joystick; 1. Function key, 2. Function lock)
  • 7-pin rear socket for lighting and rear-mounted equipment
  • Ballast weight base plate (97 kg)
  • Reversing alarm (acoustic)
  • Toolbox
  • Tool kit
  • Hand-operated grease gun
  • Combination Box (for combination bag) (Not required for cabin!)
  • Combination Bag (Warning Triangle / First Aid Kit)
  • The Crane
  • Centralized lubrication system fully automatic
  • Special painting RAL single-color - instead of Wacker Neuson yellow
  • Special painting RAL multi-color
  • EquipCare (incl. App & Manager)

Editions

  • Folding overhead guard Eps
  • Backup warning system (acoustic)
  • Rotating beacon (orange) with magnetic base
  • 2-door cabin, incl. heating and ventilation
  • Seat fabric
  • 3rd control circuit comfort, incl. single detent on lever for 3rd control circuit
  • Pressure-less return line, front
  • Proportional speed limiter (low-speed system)
  • Front 3-pin socket for double function
  • Load system P-kinematics LS950
  • Ballast weight rear attachment
  • Backup warning system (acoustic)
  • Rotating beacon (orange)

Contact us

* Mandatory fields
Contact Contact

Contact

Phone number: +49 800 7831 850

Free hotline